DQ Series
DQ-350.1
DQ-350.1 SERIES SPECIFICATIONS
| Test Conditions | ||
| Mono @ 4ohms | 252W | 14.4V/4ohm, THD=3%, Power Output 1KHz |
| Mono @ 2ohms | 360W | 14.4V/2ohm, THD=3%, Power Output 1KHz |
| THD | 0.10% | 1W |
| Frequency Response | 10Hz – 300Hz | 1W |
| S/N Ratio | 100dBr | |
| Stereo Separation | ||
| Idle Current | 700mA | Max Gain; Signal Input = 0 |
| Dark Current < 10mA | < 1mA | Max Gain; Signal Input = 0; REM = OFF |
| DC Offset | < 10mv | Max Gain; Signal Input = 0 |
| Working Voltage | 8.5V – 17V | Max Gain; Signal Input = 0 |
| Input Impedance | ∞ | Measure the RCA input impedance by multi meter |
| Input Sensitivity -RCA Input |
0.2V – 5.5V |
Max Gain; THD = 3% Min Gain; THD = 3% |
| Crossover Frequency LP | 10Hz – 50Hz; 10Hz – 250Hz; |
LP: 50Hz LP: 250Hz |
| Maximum Operating Current | 34A | 14.4V 2ohm 100Hz; THD=3% |
| Fuses Type | 20A * 2 | |
| DC Short Protection | OK | |
| Thermal Protection | Heat sink 110 degrees C will not jump protection | 2 ohm 300W 5-8 mins |
| Dimensions (L * W * H) | 140 * 128 * 42 | |
| Weight | 0.65Kg |
